This series of meters is a direct imitation of power measurement display instruments, measuring DC current and voltage, AC current and voltage, frequency, power factor, phase sequence, power, synchronization instructions and other non-power measurements. It has been widely used in a variety of AC and DC transmission and distribution systems, power control panels and other electrical devices, in the industries of maritime shipping, rail transport, chemical flameproof, low voltage equipment, construction equipment, generators, machinery equipment, etc. Being able to make electrical measurement and non-power measurement, it is a high-end instrument applied in general environmental conditions.
AC Ammeter AM-96 AM-72 AM-48 Class:1.5 Specs:0.1A 0.5A 1A 1.5A 3A 5A 7.5A 10A 15A 20A 25A 30A 50A 75-105A(useExt.CT 5A) Note:for60/75/100A direct meter, the class is 2.5. Advantage: The scale can be easily changed without opening the front frame sothat the class will not be influenced.
DC Ammeter Model:AM-96 AM-72 AM-48 Class:1.5Specs:25uA 50uA 1mA 2mA 5mA 10mA 20mA 30mA 50mA 75mA 100mA 150mA200mA 250mA 300mA 500mA 1A 3A 5A 7.5A 10A 20A 30A 50A 75-105A(used with Shunt) Feature: The scale can be easily changed without opening the front frame so that the class will not be influenced.
Frequency Meter Model:AM-96 AM-72 AM-48 Class:1.0Volt:50V 100V 220V 380V Freq:44-55Hz 45-66Hz 55-65Hz 47-53Hz 57-63Hz 44-56Hz 54-66Hz 450-550Hz 550-650Hz
POWER FACTOR For 3 phases circuits, balanced load 45-65Hz and for 1 phase AC 50Hz. Model:AM-96 AM-72 Class:2.5 Voltage:100V 380V 440V Frequency:50Hz 60Hz Scale graduation:0.5cap-1-0.5ind 0.3cap-1-0.7ind 0.4cap-1-0.4ind 0.7cap-1-0.3ind. Orders to be Noted: Type of Current:1P,3P 3W circuits, balanced load. Rated Volt: The voltage is line voltage(between two wires). Operating Current: If used with CT, the secondary current 5A or 1A is standard.
POWER METER Wattmeters with built-in converter for 1 phase,3P 3W,3P 4W. Model:AM-96 AM-72 Class:1.5 Voltage:50V 100V 220V 240V 220/380V 240/415V Current:5a These meters are used with potential secondary voltage 100V voltage transformeror secondary current 5A CT.wattmeters with built-in converter for 3P 3W,3P 4Wand single phase. MODEL:AM-96 AM-80 AM-72 AM-60 AM-50 Struction:Moving Coil,Moving Iron and Rectifier. Class:2.0 2.5
Double Ammeter & Voltmeter
1) Class: 1.5 2) Module: SF-2T96 A/V SF-2T72 A/V SF-2L96 A/V SF-2L72 A/V 3) Accuarcy: 1.5 4) Heat resistace: Case of non-combustible plastic material 5) Fastening: By means of nuts absolutely safe, fast robust, side-by-side
30-1000uA 1-1000mA 1K-10KA 1-50A
Direct connection With EXt.Shunt
40-1000mV 1-1000V 1K-10KA 1-50A
Direct connection With EXt.Resistor
1-1000mA 5-1000A 1-50A 1K-0KA
Direct connection With EXt.CT
40-1000mA 1-1000V 1K-380KV
Direct connection With EXt.CT
Voltage:50-380V Frequency:45-55Hz 45-65Hz 55-65Hz
Only AM-80 is available
Power Factor Meter
Voltage:50-380V Frequency:0.5cap-1-0.5ind 0.3cap-1-0.7ind 0.4cap-1-0.4ind 0.7cap-1-0.3ind Suitable for 1Por 3P3W Circuit
Voltage:50-380V Current:0.2-5A With Current or Voltage Transformer